Breedon

Recycled Fine Building Products

Recycled Building Products

SKU: 1769

Breakdown

Unitary Price: Log in to view price
Supply Type: Bulk Loose Product

Supplier: Breedon
Available Within: 1 day
Available To: Northern Ireland and Republic Of Ireland
Availability: Delivery & Collection Available

Product Description

A range of recycled fine building products produced from compliant sources (e.g., crushed concrete/asphalt with screened fines, or wash-plant recycled sand). Material is screened—and where available, washed—to control oversize and reduce silt. Ideal for levelling/blinding layers, paving/kerb bedding, and non-critical backfill where a tight, compacted finish is required. Where the specification demands certification, supply to EN 13242 (unbound fines) can be provided; use in EN 13139 (mortar) or EN 12620 (concrete) applications only if explicitly certified. Typical uses Blinding/regulating over sub-base before slabs or asphalt Kerb/flag bedding, block paving laying course (check local spec) Duct/cable surround (confirm with engineer/manufacturer) General backfill/haunching and make-up in non-structural zones Available options (site dependent) 0/2 mm Recycled Sand (finer finish; duct/cable surround, blinding) 0/4 mm Recycled Grit/Sharp Sand (laying courses, bedding, backfill) 0/6 mm Recycled Quarry Dust/Fines (tighter binding/regulating) Washed variants (lower silt) where specified Key properties Grading: 0/2, 0/4, 0/6 mm (availability varies by depot) Behaviour: Binds under compaction; generally non-free-draining Compliance: WRAP Quality Protocol; EN 13242 on request Notes: Chloride/sulfate levels can vary—request test data if near steel/rebar or for sensitive works Coverage guide (approx., compacted bulk density ≈ 1.9 t/m³) 25 mm depth → ~21 m²/tonne 50 mm depth → ~10.5 m²/tonne 75 mm depth → ~7 m²/tonne Actual yield varies with moisture and compaction. Quantity formula Tonnes ≈ (Length × Width × Depth in metres) × 1.9 Installation notes Place in thin, even lifts; moisture-condition for best binding Avoid placing in standing water; provide drainage/capping as required Use a separator geotextile where fines migration is a risk For mortar or structural concrete, specify EN 13139/EN 12620 compliant sands only (if available)